The list of stage terms below is what I picked up working in theatres, black boxes, festivals, commercial shows and a few venues that were really just a gym with a curtain. As with my other lists, it is not complete and might never be. Every house and every director has its own slang, and half of these words mean something slightly different in the next country.
You do not need all of it and you don’t need to be perfect. You just need enough that the light designer, the stage manager, and a crew assistant will understand what you mean.
How to read the list: Bold is the term I would use myself. (In parenthesis) are common alternatives. In italic I add comments, if necessary.
Some terms might have more meanings. I flag those, if I am aware of it, because a dancer saying one thing and a stage manager hearing another is how a rehearsal loses an hour.
If you enjoy the list and using the correct terms, bookmark it and send it to the person who keeps asking you what “downstage” means.
A note, before you check out the stage terms list
If you are working on stage and want to upgrade the impact you have on the audience, you might want to check out Performance Skills, a book I wrote together with Da Bürgermasta. It has infos on the mindset and practical exercises that make you a better performer on every stage.
Terms to describe the building and the stage
- Stage. The performance area itself. For us, everything else is defined in relation to it.
- House (auditorium). Where the audience sits. Sometimes also used for the audience as a group, as in “the house is in.”
- Front of house (FOH). Everything on the audience side: entrance, foyer, bar, box office. Technicians usually refer to their control area, that’s within the audience space as the FOH. Light and sound technicians work there to provide the best possible technical service as they perceive the performance from the audience’s perspective.
- Back of house (BOH). Everything that usually off-limits for the audience: stage, wings, dressing rooms, loading dock and so on.
- Proscenium (proscenium arch). The frame between audience and stage in a traditional theatre. It’s not a thing in most modern houses. In German language we often use this interchangeably with forestage.
- Forestage (apron). The part of the stage in front of the main curtain.
- Thrust stage. A specific setup where the stage extends into the audience, who sit on three sides. Similar to a runway in fashion.
- In the round (arena staging). Setup where the audience sits on all sides. No back wall to hide, so every entrance is visible from somewhere.
- Traverse. Setup with the audience on two opposite sides with the action in between.
- Black box. Common setup in modern houses: flat-floor room, usually black walls. The default for dance and small theatre.
- End-on. Minimalistic setup with audience on one side only Plain version of a proscenium setup.
- Raked stage. Stage floor that slopes up toward the back. Rare now, common in old opera houses. Affects your balance more than you expect.
- Orchestra pit (the pit). Sunken area in front of the stage for musicians.
- Wings. The offstage areas left and right, hidden by masking. Where you wait for your entrances.
- Offstage. All stage areas that the audience cannot see. This is where performers are when not visible to the audience but in performance mode.
- Backstage. The whole non-public area behind the stage, including dressing rooms, workshops, loading area and so on.
- Grid. The steel structure above the stage from which everything hangs.
- Trap (trapdoor). Opening in the stage floor for entrances and exits.
- Revolve (turntable). Rotating section of stage floor.
- Wagon. A low platform on casters that scenery or performers can ride on.
- Green room. Where performers, company and crew wait, eat and pretend to relax.
- Dressing room. Where you get ready. Sometimes shared with too many people and one mirror.
- Loading dock. Where trucks unload. Everything you see on stage came through here.
- Barricade. The front-of-stage barrier at festivals. If it is needed, your audience and your safety depend on it. Not common in regular theatre and dance context.
Directions on stage
- Stage left (SL). The performer’s left when facing the audience. From the audience it is on the right. For new dancers, this might be the single most useful term on this page.
- Stage right (SR). The performer’s right when facing the audience.
- House left / house right (also called audience left / audience right). The same directions from the audience’s point of view. Promoters and box office talk this way, dancers usually do not.
- Upstage. Toward the back wall, away from the audience. The name comes from raked stages, where the back really was higher.
- Downstage. Toward the audience.
- Center stage (CS). The middle. Often just shortened as center.
- Upstage left (USL), downstage right (DSR), and so on. Combination, work like a compass.
- Cross. To travel from one place on stage to another. “Cross downstage on the second phrase” is a complete instruction.
- Cross over. Passing behind the stage, out of sight, from one wing to the other.
- Sightline. What a given seat can and cannot see. If the director says “bad sightline,” they mean half the audience misses what you do or a part of what you do.
- Levels. Height in the body or on the set. Low, middle, high. Also used for a raised platform.
- Plane. Where the body or the action sits in depth: upstage plane, downstage plane. Choreographers use it to organize a group without formations. Where exactly a specific plane begins and ends is individual.
- Mark. A position someone has to hit.
- Spike mark (spike). A piece of tape on the floor showing where something or someone goes. Spike tape comes in colors, and the colors might mean something special or belong to different groups appearing on the same stage.
- Spike. The verb. To put the tape down, usually during the tech.
- Ground plan. Top-down drawing of the stage with the set.
- Elevation. Side view drawing of a piece of scenery. Also used loosely for “how high something is,” which is why drawings and conversations sometimes get confused.
The people around the stage
- Choreographer. Makes the movement and usually runs the rehearsal. In smaller productions the same person as the director and the producer. Read more about these three in the trinity of dance theatre production.
- Rehearsal director. In bigger production the person who runs the room, keeps the material alive, gives notes. In dance companies this is often the person you actually work with every day.
- Assistant choreographer. Sets and cleans material, runs warm-ups, covers for the choreographer.
- Dance captain. A dancer who keeps the piece intact on tour and teaches replacements. Usually underpaid for what they hold together. Has a job because choreographers and directors usually don’t tour with the whole production for cost reasons.
- Stage manager (SM). Runs the show and the day. Calls cues and owns the schedule. The stage manager is the bridge between the performers, the tech and the production team.
- Assistant stage manager (ASM). Props, entrances, the hundred small things that decide whether the show happens. Only a thing in big houses. In small production one SM has to do it all.
- Company manager. Looks after the humans: travel, hotels, per diems, contracts on tour.
- Producer. The person in charge of creative vision, finances and the business success of a show.
- Production manager (PM). In smaller production, this is the Producer. In bigger production the producer might and the PM executes the plan.
- Technical director (TD). Owns the technical side: what is possible, what it costs, what the venue can carry.
- Director. In theatre and dance theatre, the person shaping the whole evening, not only the movement.
- Dramaturg. Works on structure, text, research and meaning. The person who asks the annoying question, and saves the piece by doing so.
- Light designer (LD, sometimes lighting designer). Designs the light.
- Sound designer. Designs what you hear, from the mix to the effects to the playback.
- Set designer (scenic designer). Designs the physical world of the piece.
- Costume designer. Designs what the performers wear on stage, which in dance is a technical problem as much as an aesthetic one.
- Video designer. Designs projections and screen content.
- Head of department (HOD). The senior technician for light, sound, stage or wardrobe.
- Master carpenter. Builds and runs the set on tour.
- Rigger. Certified person who hangs things from the building. Never do this job informally, and never let anyone tell you it is fine. If something breaks the legal implications and costs will haunt you for the rest of your life.
- Board op (operator). Runs the lighting desk or the sound desk during the show.
- Follow spot operator. Tracks performers with a manual spotlight.
- Wardrobe. The department that maintains costumes. Also the room they work in.
- Dresser. Helps performers in and out of costume, often mid-show, often in the dark. Not a thing in small productions.
- Props master (props). Makes, sources and tracks every object on stage.
- Stagehand. General crew for loading, shifting and building.
- Front of house manager. Runs the audience side on the night.
- Usher. Seats people and deals with the latecomers.
- Répétiteur. The person who teaches and maintains repertoire in ballet and opera. The ballet equivalent of a rehearsal director plus archivist.
- Intimacy coordinator. Choreographs and supervises intimate content so it is safe, consensual and repeatable. Rarely a thing in dance pieces.
- Fight director (fight choreographer). The person who makes violence look good. Rarely a thing in dance pieces.
Light terms
- Light plot. The drawing showing every lantern, its position and its channel.
- Patch. The list that assigns each light to a channel on the light control desk. Also the verb: to patch.
- Focus. Aiming the lights, usually at the the morning of the tech rehearsal.
- Channel. The numbered address of a light or group of lights on the desk.
- Dimmer. The device that controls intensity. Most modern fixtures do it internally, and the word survived anyway.
- DMX. The control protocol that every light speaks. When someone says “DMX issue,” they mean, most likely, a cable or an address.
- Fresnel. Soft-edged spotlight, adjustable beam.
- Profile (Leko, ERS). Hard-edged spotlight with shutters for shaping and gobo slots.
- PAR can. Simple, cheap, narrow. The classic rock and club light.
- LED wash. Modern color-changing general light.
- Wash. Light that covers an area evenly.
- Special. A light for one specific moment, person or spot.
- Gobo. A stencil placed in a profile to project a pattern or texture.
- Top light, side light, back light. The three positions that decide how a body reads on stage. For dance, side light is usually the one that matters most.
- Blackout (Black). Everything goes dark.
- Bump. An instant change, on a beat, with no fade.
- Crossfade. A smooth transition from one look to another.
- Level. Intensity, in percent. “House to half” means the audience lights come down to fifty.
- Front light. Light from the audience side. Makes faces readable, flattens the body.
Sound terms
- FOH mix (audience mix). The mix the audience hears.
- Monitor (foldback). What the performers hear on stage. Can also mean the speakers that aim towards the audience.
- Playback. Pre-recorded music played from a computer or desk.
- Radio mic (lavalier, lav). Body-worn microphone. Usually not a thing in pure dance pieces.
- D.I. box. Device that takes an instrument’s signal directly and makes it stable enough to send trough the venue.
- Level check (line check). Testing if every audio signal is there and at an appropriate level.
- Sound check. Setting the balance for the room with the actual performers.
- Feedback. The howl. Caused by a mic hearing its own speaker.
- Cue. A specific piece of audio that acts as a signal for performers or technician. This can be part of the music or something separate.
Projection and video
- Projector throw. The distance and angle from lens to surface. Determines size, brightness and whether your content is sharp.
- Projection mapping. Fitting content to a non-flat surface or a specific object.
- LED wall. A screen built from panels, used as scenery or backdrop.
- IMAG (image magnification). Live camera feed of the performers onto a screen. Common in arena shows, not so much in theatre context.
- Content. The actual video files. Always get them a early, to check if they are fine.
Curtains, scenery and rigging
- Legs. Vertical masking curtains at the sides of the stage.
- Borders. Horizontal masking drapes above the stage that hide the rigging.
- Teaser. The first border, right behind the proscenium opening.
- Tormentor. Narrow leg just behind the proscenium that tightens the visible width.
- Backdrop (drop). A large painted or printed cloth at the back.
- Cyc (cyclorama). The big plain backdrop at the back, usually lit for sky, color or silhouette.
- Scrim. Fabric that looks solid when lit from the front and transparent when lit from behind. A cheap magic trick and a good one.
- Gauze. Similar idea, finer mesh, used for reveals.
- Batten (bar, pipe). The horizontal pipe scenery hangs from.
- Fly bar. A batten that can be raised and lowered.
- Fly. To raise or lower something on a bar. Also the whole system.
- Counterweight system. Manual rigging where weights balance the load. You will hear the rope lock and the arbor, and you should stay out of the way.
- Arbor. The frame holding the counterweights.
- Dead haul. Motorized flying with no counterweights.
- Truss. Aluminum frame that carries lights or scenery.
- Safety bond (safety chain). The secondary attachment that catches a lantern if the primary fails. It is not optional and it is not paperwork.
- Safe working load (SWL). The rated maximum. Ask before you hang anything, including yourself.
- Strike. To take something apart and remove it. Also the end of a run.
Rehearsal terms and the schedule
- Blocking. Fixing positions, paths and entrances. In dance, often called setting or spacing.
- Spacing rehearsal. A rehearsal in the actual space to fix distances and positions. The one where everything you made in a small studio turns out to be too big.
- Marking. Running material at reduced intensity, without full effort or jumps.
- Walk-through. Slow run, no performance energy, used to check that everyone knows where they go.
- Stagger-through. Run the whole piece, stopping whenever something needs fixing.
- Run-through. Full run, no stopping.
- Tech (technical rehearsal). Adding light, sound, props, costume and scene changes to the run.
- Cue to cue. Running only from one technical cue to the next, skipping the material in between. Mostly a theatre habit, occasionally used in dance theatre.
- Dress rehearsal. Full run in costume, with everything, treated like a show.
- Preview. A performance for an audience before the official opening. Cheaper tickets, real feedback, and permission to still change things.
- Opening night (Premiere or press night, first night). Your first public showing.
- Notes. Feedback given after a rehearsal or show. Take them, write them down.
- Sitzprobe. Orchestra and singers running the music together for the first time, no staging. Opera and musical theatre.
- Fit-up. Assembling the production in the venue, before the tech.
- Get-in (load-in). The whole process of getting the show into the building.
- Get-out (load-out). The opposite, at speed.
- Turnaround. The time between one show leaving and the next arriving.
- Advance. The advance conversation and document that settles logistics before the company arrives: schedule, tech spec, contacts, parking, power.
- Tech rider. The document listing what the production needs technically.
- Running order. The order of pieces in the evening, if multiple pieces are on stage.
- Call. A scheduled time to be somewhere, as in “your call is 18:30.” If you miss your call time, people will hate you.
Calls, cues and running the show
- Half hour. The call thirty minutes before curtain. The point after which you should already be in costume and ready to go.
- Beginners call (the beginners). The call for everyone who is on stage at the start. Usually fifteen or five minutes before. Only a thing in big productions.
- House open/open doors. The moment the audience is let in.
- Places. Everyone to their starting position.
- Standby. Warning that a cue is coming. The correct answer is usually “standing by,” not silence.
- Go. Execute the cue. The shortest and most consequential word in the building.
- Hold. Stop and do not move, do not advance, do not improvise.
- Clear the stage. Everyone off. Used before the tech, before a reset, and before something heavy moves.
- Cue sheet. The written list of what happens when. The show lives or dies on this document.
- Interval (intermission). The break.
- Curtain call (bows). Get ready for your bow.
- Reset. Returning the stage to its starting state, either between pieces or between shows.
A note on practice
Most of these words exist so that one person can give an instruction and twenty people can act on it without a discussion. It’s streamlining communication. That is the actual purpose of stage terminology.
Learn the directions and the calls first, because those are the ones where a misunderstanding costs rehearsal time. Then learn the departments, because that is how you get what you want from people who are already working at speed.
Further read
If you are building a piece rather than running a show, start with my guide on how to choreograph a dance. If you are producing the whole evening, look at the dance theater production overview and the big questions in the production process.
Are you a dancer looking to level-up up your stage presence?

Check out Performance Skills, a book I wrote together with Da Bürgermasta. It has infos on the mindset and practical exercises that make you a better performer on every stage.
